How Profile Edge Sander works

When the sanding machine starts and runs normally according to the normal procedure, the ground slab is first fed to the upper and lower coarse sand rollers from the right end of the machine, pushed by the plate limiting device and the conveying roller. The high-speed rotating abrasive belt grinds the upper and lower sides of the slab at the same time to achieve fixed-thickness grinding. Finally, the cleaning roller at the discharge end removes the remaining surface dust and sends it out of the machine. Each sanding roller and the cleaning and discharging roller are equipped with powerful dust collection devices, and the grinding dust is sucked away by the dust suction port, and the ground slab finally obtains a finished product with a flat and smooth surface and a thickness that meets the requirements.
Purpose Double-sided broadband fixed-thickness sander is a high-efficiency and powerful broadband sander designed and manufactured on the basis of the production of double-sided broadband sander. This machine is mainly used for fixed thickness grinding, coarse sanding, smoothing grinding and fine sanding of wood-based panels. Such as particle board, medium density fiberboard, gypsum particle board or other wood-based artificial board surface sanding, so that the board thickness accuracy and surface roughness meet certain requirements. Such as: secondary processing requirements.

MM45

MW630

MM320

If you are interested in Profile Edge Sander,You can browse related products and initiate consultations on our website.